Make: Somaca

Model: VEW60

Year: 2001

Condition: Very Good

Power:_ 220Volt, 3 phase, 40 amp service required

Make: Thermoseal

Model: Butaseal MKIV/A

Power: 240Volt, 1 phase,16 Amps

Year: 2003:

Condition: Good has small problem with slow heating of  hose which will be fixed upon completion of sale.

Location: Los Angeles, CA

Notes:This is a package that includes the Somaca VEW-60 vertical glass washer, Thermoseal butyl extruder and $2-3,000,00 worth of IG suppies including spacer bars and corner keys. The equipment is no longer set up. The equipment has been very well looked after and regular serviced by experienced technican. Not hardly used in the last three years. Also includes  4 additional Low E brushes as spares.

Details:  60″ open top vertical washer

The Somaca/CRL VEW-60 Glass Washer cleans glass up to 60 inches (1500 millimeters) tall in one pass.  The wash cabin is stainless steel to resist corrosion. There are fluorescent lights on the discharge conveyor to aid in final inspection of glass. Fully Equipped With All Features Needed for IG Window Fabrication Automatically Adjusts for Glass Thickness Up to 1/2′ (12 mm) Capacities Glass Thicknesses up to 1/2 inch (from 2.5 to 12 millimeters) Minimum Glass Size is four inches (100 millimeters) tall x 16 inches (400 millimeters) in length Maximum Glass Weight is 300 pounds (136 kilograms) Utilities Electrical: Four Motors Running a Total 6.9 HP (5.03 Kw) Largest Motor is 5.5 HP (4 Kw) Voltage required is Three Phase at 60 cycles, 220 volt power Power at Full load current is 37.83 amps – Service requirement 40 amps Total Energy 8.5 Kw Fresh Water: 1.38 gpm (4.48 lpm) @ 30psi (2 atm) (Description taken from manufacturers web site ans subject to verification)