Asset Number: 162

Make: Casso-Solar

Year: 2000

Type: Glass Bending & Tempering Oven

Location: Mid West USA

General Specifications for Bending and Tempering Oven

Product to Bend: Glass

Product Size: 32″ x 32″ Maximum

Glass Thickness:  3/16 ” Minimum

Depth of Sag Bend: 1″ Minimum/10″ Maximum

Production Cycle: 45 seconds/part

Preheating: 4 1/2 Minutes

Bending: 2 1/4″ Minutes

Molds required: 17 per part type

Heating Stations:  Total 18

One (1) load area

One (1) unload area

Six (6) Preheat Stations

Three (3) Bend Stations

One (1) Hold Stations for future press

One (1) Quench Station

One (1) Transfer Station to cooling

One (1) Cooling Station

Quench Motor Size: 100 H.P.

Overall Length: Approximately 52 feet

Overall Width:  Approximately 15 feet

Total Power: 665 K W at 480 volts, 3 phase, 60 Hz

(800 amps at 480 volts, 3 phase)

Estimated Power Consumption:  425 K W at 480 volts, 3 phase

Programmable Logic Controller: Allen Bradley SLC 5/03

Interface: IBM Compatible Computer

Notes:  This furnace is still hooked up and can be inspected by appointment only.  Buyer is responsible for removal from present location, and all costs involved for the removal and transportation. We have a qualified technician available for assistance in removal, installation and training if needed, please contact us for rates for this service.

[one_third]

[/one_third]

[one_third]

[/one_third]

[one_third_last]

[/one_third_last]

[one_third]

[/one_third]

[one_third]

[/one_third]

[one_third_last]

[/one_third_last]