Ball Caster Support Table
The Ball Transfer Table is for lateral transfer of single lites of glass and single or multiple insulating glass units. The Table has the following features.
- Table top frame is fabricated from 2” x 2” heavy wall tubular steel. The ball casters are screw mounted onto the top frame. The casters are 2” diameter neoprene balls and the overall height of the ball caster is 2 5/8”. The neoprene caster balls will not scratch the glass. Construction of the frame is all MIG welded. Ball Casters can be mounted on 6” x 6”, 6” x 8” or 12” x 12” centers. Tables are made in all sizes.
- The table legs are fabricated for 2” x 2” heavy wall tubular steel. Each leg is equipped with a built in 1 ¼” diameter threaded jack bolt for adjusting the operating height of the table. The legs are attached to the table top frame with bolts and are removable. These legs allow the user to level the table without floating the floor or using shims.
A) 5’ x 6′ Ball Caster Table with Ball Casters mounted on 6” x 8” centers. Call for Pricing
( Total of 81 Ball Casters )
B) 5’ x 6′ Ball Caster Table with Ball Casters mounted on 6” x 6” centers. Call for Pricing
( Total of 120 Ball Casters )
C) 5’ x 6′ Ball Caster Table with Ball Casters mounted on 12” 12” centers. Call for Pricing
( Total of 30 Ball Casters )
The most popular ball caster table is the configuration with ball caster mounted on 6” x 8” centers. Not many buyers specify the 12” x 12” or 6” x 6” caster spacing. Table with 6” x 6” caster spacing offers only a marginal performance advantage over a table with casters spaced on 6” x 8” centers. A table with casters spaced on 12” x 12” center is best used when handling minimum sized 30” x 30” glass lites Recommend caster table with 6” x 8” centers. Other sizes available please contact us for pricing.
Caster table is shipped in knocked down basis. Assembly requires bolting on four ( 4 ) table legs and installing ball casters ( screw holes predrilled ).
